BT371A


Machine Introduction

  • This machine adopt PLC control and operator interface.  The Screen shows every detailed parameters of glass.
  • The two conveyor belts are driven by two high precision servo motors. 
  • The synchronism of transmitting is very high.  The torsion of output keeps the constant.
  • The mobile grinding section moves along linear twin ball bearing guide. 
  • The transmission is implemented through twin ball bearing lead screws, which is driven by motor with break. 
  • The raise/drop of upper tracking system and upper arris motors are driven by motors.  It can be set automatically according to different glass thickness input.
  • The polishing wheel is operated by air, which can move forwad/back according to glass position.
  • This machine use high precision low vibration ABB motor.
  • This machine adopt timing belts transmission.  
  • The machine equipped a auto lubrication pump, which lubricate the lead screw..
  • Working speed adjustment through Frequency inverter.  

 Technical parameters 

  • Spindles: 11 heads. 
  • Speed: 0.75m-3.9m/min 
  • Max. bevel width: 50mm 
  • Bevel angle: 0°-25° 
  • Min. glass size: 100mmX100mm 
  • Glass thickness: 3mm-19mm 
  • Total power: 22.5KW 
  • Total dimension: 7.6mX1.2mX2.6m 
  • Weight: 5000Kg